• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Bike India

Best Bikes in India | No.1 Two Wheeler Magazine

Pulsar NS400Z – CHALA APNI

  • Home
  • News
    • Upcoming Launches
    • Latest News
    • New Bike Launches
  • Reviews
    • First Ride
    • Road Test
    • Comparison
  • Features
  • Our Bikes
  • Videos
  • Subscribe
  • NG Auto
    • AUTO COMPONENTS INDIA
    • CAR INDIA
    • COMMERCIAL VEHICLE
  • Brands
  • AUTHORS

Bike India Team

Valvoline Cummins India dealer meet

June 9, 2011 by Bike India Team Leave a Comment

Present at the occasion were Pune Warriors; Saurav Ganguly and Rahul Sharma

In order to enhance its relationship with dealers, Valvoline Cummins India organized a dealership meet in Delhi. Sandeep Kalia, CEO, Valvoline Cummins India said “we continuously want to lay emphasis on the importance of our business partners and interact with them directly.” The company is one of country’s leading lubricant manufacturer. Also present at the event were cricketers Saurav Ganguly and Rahul Sharma. Amongst others who attended were Sandeep Singla, AVP, Valvoline Cummins India and Abhinav Sharma, Marketing Manager, Brand, Valvoline Cummins India.

Words: Amit Panday

Filed Under: New Bike Launches, News

Spinning Tales

June 9, 2011 by Bike India Team Leave a Comment

The show is over. The Pune air is filled with heat and humidity, and the spicy Indian food has lately taken its toll on Chris Pfeiffer. To make matters worse, the concrete at the Pancard Club open-air gymnasium, where the event was being held, was so smooth that finding traction has left the four-time world Freestyle stunt champion breathless. But ever the smiling gentleman, Pfeiffer happily posed with his ever growing legion of fans and then sat down for an informal chat with Saeed Akhtar. Some excerpts

Photography: Bhuvan Chowdhary, Red Bull, Urvashi Patole

Bike India: There’s a huge disparity in power between Indian bikes that we generally use for stunting and, say, your F800R. What are your impressions on our bikes as regards stunting?

Chris Pfeiffer: The Pulsar 200 is a pretty good bike for beginners. It’s very important to learn this sport step by step so there’s nothing better than starting on a small bike. I did the same. I was riding the small trials bike for long time. There’s no reason to ride a 600 or 800. You can also do this sport on a 125, 180, 200 or even on a scooter. I know many accomplished stunters who started out on scooters. Obviously, you can’t pull large wheelies on it but the lesser power gives you more control over the bike.  The advantage of a four-cylinder bike is that you have more balance than a small single-cylinder bike.

BI: You’re travelling to more cities than the last time you were here. How do you find the scene here in India? How enthusiastic are the people here when it comes to biking and stunting?
CP: It’s even bigger than the last time I was here. Such an amazing crowd. People go really crazy and I love it so much. The experience is great. Whether it is small town or large, it doesn’t matter.

BI: What are some of the special modifications that you’ve carried out on your F800R for stunting?
CP: Well, I have a handbrake – an additional handbrake, like every freestyle rider nowadays. Also a different handlebar, different seat, some different footpegs, crash protection around the engine, and bigger sprockets to harness the power better. And that’s it. The rest is standard. Engine, frame, suspension, wheels, are stock.

BI: In the video where you  invade the BMW tower in Munich, you finish it off with a somersault on the top of a 22-storey building. Don’t you have any fears?
CP: I have fears, of course (laughs). I’m scared of snakes and railways, but not scared of heights. I used to be a free-climber. I used to roam the mountains and never had a real problem with heights. So standing there, everybody was scared of me, and I was sure they would cut it out of the video clip, but they kept it!

BI: You spend a lot of time on the road with your F800R and your trials bike. Which other bikes do you own back home?
CP: I have three bikes in India at the moment, for this tour. Two are at home. I have a Husqvarna 450 enduro bike and two trials bikes. I have a BMW S1000RR, which is at the moment, the fastest production bike in the world. It is modded, with an open silencer and more than 200 horsepower. I went for a little spin on it on the autobahn recently. There, I had 299 on the speedometer, and it doesn’t go more than that – there’s a limiter. The speedometer goes only upto that, but the rev meter goes higher. So you know, its going faster than 300,yeahh! I also have several old bikes on which I have won some championships.

BI: Last time we talked, you told us that your son, Hannes, is already into stunting. Will you like him to continue in this profession?
CP: Hannes is already doing stunts on his small trials bike. I don’t push him at all, I just support him. The girls also ride bikes. They like it, and my son loves it — this is the difference. Like they love dancing, he loves riding, typical girls, typical son (laughs).

BI: What’s your favourite Indian cuisine so far?
CP: Ummm, just a second, (thinks), biryani is something that I really like, and the one with a red sauce with potato inside, very spicy, (crowd chants: aloo tikki? aloo paratha?), something with aloo. (Gives up) I like everything with aloo in it. And I am getting used to the spicy food more and more.

BI: One last question. If it were not for stunting, what would Chris Pfeiffer have been?
CP: I would have loved to be a freestyle skier or a musician. But most likely, I would have loved to be a teacher, because I love sports and biology.That’s the reality, I guess.

Filed Under: Interviews, News

To Each His Own – Discover 125

June 9, 2011 by Bike India Team Leave a Comment

Bajaj Auto has filled the void in its Discover family of bikes by launching the Discover 125 DTS-i again. It has a different character from the earlier one and a lot of water has flowed under the bridge since then too. So how does the new one fare against the bunch of 125s out there? Piyush Sonsale answers [Read more…] about To Each His Own – Discover 125

Filed Under: Review, Road Test

The Invincible

June 9, 2011 by Bike India Team Leave a Comment

Ducati’s Multistrada is supposed to be an all-rounder. Adhish Alawani swings his leg over one to find out how

 

Photography: Sanjay Raikar


Ducati’s Multistrada is supposed to be an all-rounder. Adhish Alawani swings his leg over one to find out how

Google translate tells me that Multistrada in Italian means Multipath in English. While christening a bike Multistrada, Ducati must have thought a zillion times as to how the end consumer will perceive it. For a brand that is typically a sportsbike and a street performance oriented one, bringing out a machine that is supposed to be strong enough to attack multiple paths or surfaces is a challenge in itself. But that is something Ducati must have worried about a few years ago when they introduced the Multistrada for the first time. Over the years, they have gone on to improve the bike every now and then, and today, what we see as the current edition of Multistrada is sheer excellence of mechanical and electronic engineering put together.

At a first glance, this Ducati looks a little weird; difficult to suit my taste of styling. I love the way Ducati styles their bikes otherwise. In fact, why me, the whole world loves them. The 916 revolutionized motorcycle designing. And of course, we love the new age 1198 or the Monster or the Streetfighter. But the Multistrada is something whose styling has not been talked about much; and there are reasons for that. Being a dual-purpose machine, it definitely is tall with long suspension travel, raised handlebar and high seat – which is all perfectly fine. But look at the front end and the beak coming out from under the cross-eyed headlamps. It’s ugly. And weird. At the rear, is a sharp tail topped with grab-rails that double up as a base platform for your luggage. The twin slim exhaust pipes on the right hand side look a little small for the size of this bike. Actually, the Multistrada, as a whole, isn’t a bad looking bike. It’s good, but does not live up to the standards of art that Ducati has otherwise set and that’s mostly just because of that front end which reminds me vaguely of Uncle Scrooge from Duck Tales.

Getting on to the bike is a tough task for any one who is less than say 5’ 7”. At 850mm seat height, it’s fairly alright but the broad seat makes it tough for a short rider to reach the ground with both feet. However, for shorter people, there is an optional 25mm lower seat accessory. The posture is upright with raised handlebar and front footpegs. Knees tuck in fairly well behind the side panels. The seat is comfortable and the rear step seat provides an excellent support to the rider’s waist. Not being used to riding enduro or dual-purpose bikes much, It took me a little while to get used to the motorcycle’s overall tall character. But once on the road, instead of worrying about the tall, upright riding posture, I was enjoying hundreds of other things that grabbed my attention and how!

The Multistrada 1200 is powered with an 1198cc 90-degree v-twin engine borrowed from the 1198 superbike. The difference is that this one is detuned to 150PS from 170PS of the 1198 – now that’s not much of detuning and for a dual-purpose bike, it’s a lot of power too. With 150 horses available for unleashing at the twist of the right wrist, the Multistrada was getting to be a lot more fun than expected. Manoeuvrability through the city traffic was easy but the v-twin was irritating a bit with its jerky response every time the throttle was opened or shut. I knew about the electronics that govern this motorcycle and decided to play with them a bit to see if this issue can be addressed. Going through the big, white backlit digital instrumentation console, which displays a lot of data, I reached out to the ride mode setting. Toggling through the modes, I shifted from Sport to Urban and experienced something that I hadn’t imagined. I had read a lot about the greatness of the electronics on the Multistrada but experiencing is believing and it was really very hard to digest the kind of change these electronics had brought about. The throttle response got retarded and power came gradually enough to give a very smooth ride in the city traffic. The sudden engine braking on throttle roll-off disappeared.


The Multistrada had become way more sane and manageable now. So how does this work? Basically, the Multistrada has four riding modes – Sport, Touring, Urban, and Enduro. The ride-by-wire engine management offers four different mappings for these four different modes. The throttle response is quickest in the Sport setting and goes on decreasing gradually in the consecutive modes. To make it even more complicated, the maps vary the throttle response all the way through the rev range and also with the gear selection and engine load. The peak power output in Sport and Touring is the same at 150PS but it has been slashed down to as low as 100PS for Urban and Enduro modes. And it doesn’t end there. The Multistrada comes with DTC (Ducati Traction Control). Of course, there is an option to switch the DTC on or off. But the real fun is in the way the DTC synchronizes itself with the modes that we discussed earlier. For the first three modes, the DTC works on the same setting. However, in Enduro mode, the DTC modifies itself in a way so as to allow you the slides in the dirt to some extent without completely switching itself off. It’s like an optimum balance between letting you slide the bike without the electronics losing control over the bike. Impressive to the nth degree. 

Talking of DTC, it was another big thing that took me by surprise. With DTC switched on and the bike in Sport mode (to ensure full power and throttle response), I started attempting wheelies. In a normal course, a bike with 150PS of power and 118Nm of torque would pop power wheelies effortlessly. But with DTC on, one might as well forget about it. In fact, one should not even think of the clutch wheelies for that matter. As soon as the DTC senses the front wheel popping up in the air, it cuts off the power just enough to keep the bike planted on the ground. The DTC also senses rear wheelspins and manages power delivery to the rear wheel accordingly so as to make sure that you don’t lose traction. Switch off the DTC and you have all the access to the stunts you intend to do.

Moving away from the electronics of this bike, there are various other things that enthralled me in every possible way. The Multistrada is very impressive when it comes to handling. Personally being more of a sport bike rider, I took some time getting used to the way this bike behaves at corners but once in sync, the Multi delighted me even when leaned over. The frame design combines steel tubes that are typically seen on Ducatis with a central section of die-cast aluminium, plus a rear sub-frame whose steel tubes are reinforced by a techno-polymer section that contributes to its strength. The suspension comprises 50mm USD Marzocchips up front and a multi-adjustable Sachs rear shock with a remote preload knob. The higher version of Multistrada, that is the 1200S, replaces these with Ohlins, which are completely electronically adjustable suspensions giving you an additional option of raising or decreasing the ride height as suited for the road and ride conditions. The Multistrada comes equipped with Pirelli Scorpion Trail tyres that have been developed specially for this bike and are suitable for road as well as dirt. However, they aren’t good enough for hardcore off-roading.

On the highway, the bike munches miles so quickly that it becomes a little tough for the rider to cope up with it. The credit for this goes to two aspects – the extremely powerful motor that can do 200kmph at 7,000rpm in the top gear (so cruising at 140–150kmph is just too easy on the engine) and riding comfort that doesn’t make you feel uneasy even at that speed for hundreds of kilometers. The front windscreen is adjustable for height and manages to keep away the windblast from the rider’s chest to a great extent. Off the road, the bike is brilliant too, with 170mm suspension travel and traction control that allows you slides but keeps the bike well under control. The 189 kilos of dry weight is on the lighter side on tarmac but is slightly heavier for Enduro riding. Maybe, that’s also because I am personally not used to doing a lot of off-roading.

All said and done, what was the impression at the end of the day? I must say that there are innumerable amazing motorcycles in the market today, which will impress every one in many possible ways. However, I have to admit that the Multistrada manages to amaze me in a very unique way. This Ducati has achieved a versatile state where it can deliver you the sportiness, touring abilities, off-road fun and most importantly an all-round usability with hardly anything to complain about. Multistrada is here to cater to your every need. That also makes me wonder whether motorcycles will be the same tomorrow as they are today. This motorcycle is a very good example of what we are going to see in the future from production bikes. Ducati has started it. No doubt, the future is already here!

Captions:

1 The two knobs on either side of the windscreen let you adjust the screen for your convenience

 2 The design of the Multistrada is something that doesn’t live up to the standards the Ducati has already set

 3 The rubber tops on the pegs are removable. That leaves the pegs with metal spikes to give better hold when you wear off-road boots

 4 The high tech key with a proximity sensor doesn’t need to be inserted anywhere except for refuelling. The bike starts with ignition button only when the key is around

 5 The easily accessible knob for rear suspension lets you adjust the shocks to suit the riding conditions

 6 Apart from the basic info like speed, rpm, odometer, tripmeter and engine temperature, the digital console displays a lot more like average speed, fuel consumption (instantaneous and trip), ride time, air temperature etc. You can also toggle through different riding settings and traction control from the menu of the console

Filed Under: First Ride, Review

The basics of motorcycle maintenance

June 9, 2011 by Bike India Team Leave a Comment

Nowadays a visit to the service station with your bike is like visiting a doctor – they do not believe you unless you walk in with the same symptom more than twice.


Nowadays a visit to the service station with your bike is like visiting a doctor – they do not believe you unless you walk in with the same symptom more than twice.

Many riders out there take their bikes apart in order to service them, many do it out of passion, while some do it to avoid a downward spiral into debt. Maintaining a bike may on a few occasions get heavy on the pocket, but nevertheless is an essential part of owning a motorcycle. BI’s Raymond Raj looks into the basics of maintaining a Honda Unicorn.

Give the engine some Lubrication
The phrase “God is in the details” suits the oil-changing process perfectly. Changing your bike’s engine oil sounds very simple but even experts goof up sometimes. If you want to keep your engine running well, change the oil often; it is simple – provided you do it right.

The oil drain bolt will be at the bottom or at the side of the engine. Make sure you place a container large enough to hold all the oil below the drain bolt. Draining the oil is best done when the engine is hot, but if it is way too hot you can get a nasty burn, so wait a while and let it cool down a bit. Using a proper size wrench, open the bolt and let the oil flow into the container. Once you have the bolt out, inspect it visually to get rid of any metal particles that are stuck to it. Tilt the bike a little so that every last drop of used oil flows out. The oil filter is to be changed at every alternate oil change, as it filters the oil of any unwanted impurities.

Once the engine is drained refit the drain bolt. Ideally, you should use a torque wrench to do this, but even if you use a correct size wrench, make sure it does not slip. Using a funnel pour in the specified quantity of  new oil through the dipstick opening at the top. The oil level can be checked by using a dipstick; some bikes also have a glass window. The level of the oil should not be more than the specified quantity, closer to the maximum mark on the glass window and the dipstick. Since we were using a Unicorn it requires one litre of oil. When checking the oil level with a dipstick never screw it in, just dip it and remove to check the level. Recap the dip stick and you are done.

CAPTION
1] Unscrewing the oil drain bolt
2] Draining the dirt and engine oil
3] Checking drain bolt for any metal particles stuck to it
4] Refilling with new engine oil of specified quantity



Keep your carbs checked
The thought of overhauling or draining the carburettor can instigate fear in many. To drain and clean the carb, empty the float before you turn it over to avoid the fuel from attacking the diaphragm. Spray the carb with brake cleaner (make sure it is rubber friendly) or with normal air from the compressor. Undo the tops’ screw without it slipping and watch out for little O-rings under the tops that help in sucking in air. Check the diaphragm for holes and also make sure the needles are evenly tapered. Do the same for the float chamber screws.

Once this is done, remove the pilot and main jets with a well-fitting screwdriver. These jets are very small and even a little speck of dirt can reduce the jet size. Blow clean them, as well as the emulsion tubes, with aerosol or compressed air. If the jets are very grimy soak them in brake cleaner.

The air mixture screws are tiny and tricky to handle. There is a default factory setting for these which you should return them to while reassembling. Screw it on until it is seated and remember the number of turns as a point of reference for re-fitting. Get the O-rings out too, which are at the end of these screws. Now that all the jets, screws, and O-rings are out you can go at it with an air-dust remover to get rid of any last traces of grime. Do not use pins or wire brushes on the jets.

CAPTION
Carb can be drained by loosening the screw to drain out dirt and fuel

Batteries
With many motorcycle companies opting for self-starters these days, a lot of   emphasis falls on the batteries, which are mostly way too small for the kind of work they are required to do. A battery
will  discharge slowly, one per cent of its charge per
day if it is left alone not doing anything. A battery should be charged till it is gassing freely.
Add distilled water to the battery if the level is low. You will need to unscrew the caps on top and fill the water evenly in all the wells. Keep in mind not to overfill it with water as while charging it will overflow and mix with the acid causing harm to your bike. Plug the charger and connect the terminals with correct polarity being achieved, positive to positive and negative to negative. Interchanging the terminals will result in the draining off of the battery of whatever charge it already possesses. Plug the charger to the battery and charge the battery at one-third its rated capacity in A-h for 5-6 hours for a full charge.
There is a trick to make an almost junk battery that does not hold any charge, work. Add one-fourth of a teaspoon of magnesium sulphate (Epsom salt) to each cell. This works 60-70 per cent of times; it will get you through for the 2-3 months of winter. It won’t hurt the bike as the battery is already junk.

CAPTION
1] Connecting the battery with wrong polarity will drain it   2] Battery should be charged with correct polarity  3] Topping up the battery with distilled water


Changing the chain and sprocket

A chain and sprocket comprise the final drive delivering power to the wheel. A shagged chain and a worn-out sprocket will rob you of precious horsepower and fuel.

First you need to know to what extent the chain is worn out. If by pulling the chain on its way out you are able to expose more than half a tooth of the sprocket it is time to change them.

Remove the front sprocket cover and remove the clutch actuating mechanism to gain access to the sprocket nut. Clean and degrease the dirt. Before you loosen the rear sprocket nuts put the bike in gear and ask a friend to hold the brakes. Do not loosen them too much as they will hinder the wheel turning. Now wedge in the lock washer and loosen the front sprocket nut. To remove the chain, visually locate the chain lock and open it. Once the chain is off, remove the rear wheel and the rear sprocket, which is usually bolted to the rear hub.
If the bolts are corroded clean the grime
that you see.

While refitting the new sprocket be sure you bend over the locking tabs if there are any and as for the chain, the closed end of the chain lock should be in the direction of chain motion. When you have everything in place tighten the bolts, and before refitting the front sprocket cover adjust the clutch actuating assembly. Lube the chain and take the bike for a short ride, after which the chain will stretch (all chains tend to). Re-adjust the chain slackness
once back.

Also keep in mind to never over tighten the chain as it will adversely affect the gear box bearing, wheel bearing and also the fuel efficiency. Ideally, there should be 10-15mm slack in the chain when the bike is off the stand and loaded or with the rider seated on it.

CAPTION
Chain tightening and slack adjustment

Filed Under: Features, Technology

  • « Go to Previous Page
  • Page 1
  • Interim pages omitted …
  • Page 157
  • Page 158
  • Page 159
  • Page 160
  • Page 161
  • Interim pages omitted …
  • Page 203
  • Go to Next Page »

Primary Sidebar

Follow Us

LATEST ISSUE

Pulsar NS400Z – CHALA APNI

19TH ANNIVERSARY SPECIAL

Bike India - India's no. 1 two-wheeler magazine

Triumph Street Triple 765 R and RS Review | The Best Street Triple Yet

Ducati Diavel V4 Review | Devil of the Mountain

Royal Enfield Hunter 350 first ride | Aspi Bhathena

SPECIAL Featured Story

Yamaha FZ-S Fi Hybrid

Yamaha FZ-S Fi Hybrid Launched

The Yamaha FZ-S Fi Hybrid has been launched at Rs 1.45 lakh (ex-showroom). Yamaha claim that this is India’s first sub-150-cc hybrid motorcycle. 

More about this.

Recent Posts

  • Ultraviolette Expands To Europe
  • Reise Helden ECE-certified Helmet Launched at Rs 3,499
  • Big in Size, Short on Practicality
  • TVS Apache RTR 200 4V 2025 Launched at Rs 1.53 lakh

Car India

Car India Magazine - Get your Digital Subscription

Footer

Latest News

Ultraviolette Expands To Europe

Reise Helden ECE-certified Helmet Launched at Rs 3,499

TVS Apache RTR 200 4V 2025 Launched at Rs 1.53 lakh

Sudarshan Venu Appointed as Chairman of TVS Motor Company

Pulsar NS400Z – CHALA APNI

Pulsar NS400Z – CHALA APNI

Bike India: India’s no. 1 two-wheeler magazine

BIKE India covers the two-wheeler industry in its entirety, both from the local and the international perspective. Also delivers the most definitive verdict on machinery and performance by explaining the hows, whys, and whats on every new bike in a lucid and user-friendly manner. BIKE India is the India’s most authoritative two-wheeler publication, a magazine for people with a passion for bikes and everything to do with their history and heritage.
SiteMap

Copyright © 2025 · BIKE INDIA INDIA’S NO. 1 TWO WHEELER MAGAZINE, BY FAR! ·